Tile, Slab, and Stone Block Moisture Dryer
PROPERTIES:
- This Machine Dries The Surface And Inside Of The Stone Up To 97% By Using Electromechanical Radiation And Without Raising The Temperature Of The Stone (Range Of 40 Degrees Celsius).
- Considering That The Radiation Is In The Frequency Range Of The Hydrogen-Carbon Bond In The Water Molecules, This Method Will Not Have Any Destructive Effect On The Stone Texture.
- The High Speed Of Stone Drying (2 To 3 Minutes) Is One Of The Significant Advantages Of This Machine, Which Is Done Continuously And Can Be Adjusted On The Speed Of Line Transfer Rate.
ADVANTAGES:
- Small Dimensions Of The Device Compared To Competing Models
- High Processing Speed
- Continuity Of The Process
- Optimal Energy Consumption
- The Ability To Identify The Presence And Absence Of The Load
- Can Be Installed On The Factory Production Line
- Up To 20% Energy Saving
- No Destructive Damage To The Original Texture Of The Stone
- No Need To Move The Stone From The Production Line
- Ability To Immediately Apply Resin After The Process Is Finished
- Can Be Designed And Manufactured For All Dimensions And Types Of Stone And Even Tile
- Operation Only With Electricity Consumption
ECONOMIC FEASIBILITY OF TILE, SLAB AND STONE BLOCK MOISTURE DRYER
– In the traditional method, 100 liters of methane gas are consumed per square meter of stones.
– In the SAM method, 200 watts of electrical power are consumed per square meter.
– The annual production rate of the traditional method is 150,000 square meters with 80 slabs
per day.
– The minimum amount of increase in annual production rate is considered as 5% which is equal
to 7,500 m2